General Information:

Company Name:	C & S Metal Fabricating, Inc.
Plant Location:	Houston, Texas
Mailing Address:	5610 Northdale St., Houston, Texas 77087
Telephone:	(713) 644-8152
Fax:	(713) 644-0807
E-mail:	chip@csmetalfab.com
Establishment:	Started January 1980
Ownership:	We are a Texas corporation chartered in 1981 S.F. "Chip" Holmesly, Jr. owns 100% of the stock.

Principal Products:
Sheet & Plate Fabrication                                            
Non-Code Vessels, Tanks & Pressure Piping
Structural Steel & Skids
Stacks
Platform & Ladders
Hoppers & Bins
Duct work(16ga. & heavier) & Pipe Fabrication (thru 108")
Fabricated Concentric & Eccentric Reducers
Pipe Supports
Carbon, Alloy, Stainless & Aluminum

Largest Weldment to date:
Stack, 12'-3" Dia. x 50 ft. long, 68,000 pounds.
Bunker, 12’ x 12’ x 26’ long, 120,000 pounds.

Largest Beams to date:
36" x 280 lb/ft beams 60 ft. long, fabricated.

QA/QC Manual:
Yes.

Work Space:
Total Shop Space-12,250 sq.ft.

5614 Northdale:
6000 sq. ft. building 75' W x 80' L x 14' H.
(2) 1 ton and 1/2 ton jib cranes.
(2)  5000# capacity forklifts.  

5610 Northdale:
6250 sq. ft. building 50' W x 125' L x 30' H.
(1) 10 ton bridge crane.
(1) 4 ton bridge crane.

Lifting Capability:
Weldments up to 40 tons are moved within the building using machinery rollers, forklifts, and overhead cranes.
Lifts up to 365 tons are accomplished with the use of truck mounted hydraulic cranes furnished by rigging companies. 

Principal Equipment:

Fabricating
Plate Shear, 10' x 1/2" capacity.
Press Brake, 250 tons 10 ft. between housing, 12 ft. overall length
Press Brake, CNC, 100 ton, 8 ft. between housing, 10 ft. overall length
Duplicating Punch, 50 ton punching capacity, (1/2" plate)
Ironworker, 90 ton Punching Capacity, (1" plate)
Plate Roll, 4' x 3/8" capacity
PAC 10 Plasma Burner, 3/4" stainless capacity
Horizontal Band Saw, 12" pipe or 18" beam
CNC Burning, 8' x 20' table, plasma to 1.5", oxyfuel to 8"

Machining
Lathe, 16" x 72" capacity
Index Mill, 1" capacity
Drill Press, 1" capacity

Welding
(1) Miller 300 GMAW, FCAW
(4) Miller 250 GMAW, FCAW
(3) Miller 200 GMAW
(1) Miller 250 SMAW, GTAW
(4) Miller Dim 400 (500 Amp)
GMAW,FCAW,GTAW,SAW.SMAW
Webb turning rolls 15 ton drive with two 15 ton idlers (45 ton total)

Welding Qualifications:
All procedures and welders are qualified to ASME Section IX and/or AWS D1.1

Engineering Capabilities:
Sub-contracted – Delta Drafting.

Major Sub-contractors:
Sandblasting & Painting - W.T. Buck & Co.
Galvanizing - Southwest Galvanizing.

Union Affiliations:
None.

Sales Office:
C & S Metal Fabricating, Inc.
5610 Northdale St.
Houston, Texas 77087

 

 

 

 

 

 

 

 

 

 

 

Houston Metal Fabricator